Siding Contractors in Centerport, NY

A Siding Contractor for Centerport's Harbor Homes

Centerport wraps around the head of Centerport Harbor and Mill Pond, and the housing follows the water. Along Little Neck Road and the harbor shore are old summer cottages from the 1920s, long since winterized, alongside bigger homes rebuilt on the same lots. On the Little Neck peninsula and the hills near the Vanderbilt Museum are substantial mid-century homes on wooded parcels. Toward Route 25A the streets are 50s and 60s capes and splits. AP Siding & Windows installs cedar shake, vinyl shake, horizontal lap, insulated vinyl, board and batten, and fiber cement across all of it, including the odd angles of a cottage added onto three times.

The harbor is open to Northport Bay and the Sound beyond, so the water-facing homes on Little Neck and along the shore road get salt and north wind through the cold months. Those walls get stainless or hot-dipped hardware and products that need no paint. The peninsula and the hills are heavily wooded, and shaded walls stay damp. On the old cottages the framing is often light and the sheathing is sometimes just boards with gaps, so we spend time getting the wall solid, wrapped, and flashed before new siding goes on. Inland near 25A the exposure is ordinary and the job is more straightforward.

Siding styles we install

Horizontal Vinyl Lap Siding

The classic look for the capes, ranches, and colonials that fill Centerport. Low maintenance, available in dozens of colors, and never needs painting.

Vinyl Shake & Shingle Siding

The look of cedar shakes without staining, splitting, or rotting. Works on a whole home or as an accent on gables and dormers.

Board & Batten Siding

Vertical siding for farmhouse, modern, and coastal exteriors, often combined with lap siding for contrast.

Fiber Cement Siding

The premium option: heavy, fire-resistant, and very durable, with a real painted-wood look.

Signs it's time to replace your siding

• Cracked, warped, or loose panels, especially after a storm
• Faded or chalky color that no longer cleans up
• Soft spots, rot, or mildew along seams and trim
• Water stains or peeling paint on interior walls
• Drafty rooms and rising heating and cooling bills

Siding and windows in one project

Replacing windows at the same time as siding is the smartest way to do both. With the old siding off, new windows can be flashed and sealed properly on every side, and all the exterior trim comes out clean and consistent. You get one crew and one schedule for the whole exterior.

How We Replace Siding on Centerport Homes

1. Free on-site estimate We measure, look for hidden damage, and go over materials and colors with you. You get a clear written quote.
2. Tear-off We remove the old siding down to the sheathing and protect your landscaping and walkways.
3. Repairs underneath Any rotted or damaged sheathing is replaced before anything new goes on.
4. Weather barrier and flashing We install house wrap, then flash windows, doors, and corners.
5. New siding and trim We install siding, soffit, fascia, and trim to manufacturer specifications so your warranty stays valid.
6. Cleanup and walkthrough We haul away all debris, sweep for nails with a magnet, and do a final walkthrough with you.

Centerport at a Glance

ZIP

11721

Township

Town of Huntington

Permits

Town of Huntington Building Division

County

Suffolk County

Estimates

Free, in person, written price after measuring

Crew

In-house, based in East Northport

Centerport Shore, Peninsula, and Hills

Little Neck Road runs out onto the peninsula between Centerport Harbor and Northport Bay, with waterfront homes on both sides and Centerport Beach at the end. The Mill Pond area at the head of the harbor, near the old mill and Route 25A, has the hamlet's oldest cottages. The hills around the Vanderbilt Museum and Planetarium hold larger wooded lots with estate-era and 60s homes. Centershore Road and the streets near the Centerport Yacht Club have waterfront and near-waterfront houses of every age. South of 25A toward Greenlawn and the Harborfields schools the lots are smaller and the homes are postwar. The Greenlawn line is close on the south and west.

Centerport from Mill Pond to Little Neck

We cover all of Centerport, including the Little Neck peninsula, the harbor shore, the Vanderbilt hills, and the inland streets south of 25A. Northport, Greenlawn, and East Northport are immediately adjacent, and Huntington and Fort Salonga are on the same crew route around the harbors.

• Northport, NY
• Greenlawn, NY
• East Northport, NY
• Huntington, NY
• Fort Salonga, NY
• Asharoken, NY

Frequently asked questions

How much does it cost to re-side a Centerport cottage?

The old harbor cottages are small but rarely simple. Additions, odd rooflines, and light framing mean more cutting and more repair per square foot than a plain cape. We price on measured wall area, material, tear-off, and trim, plus the repair allowance the house needs. Vinyl keeps it lowest, fiber cement is the top tier. The number comes in writing after we measure.

Do I need a Town of Huntington permit to side my Centerport home?

Centerport is an unincorporated hamlet, so the Town of Huntington Building Division is the permit office. A like-for-like re-side usually needs no permit. Sheathing replacement, structural repair, or new window openings can. Waterfront lots on Little Neck and the harbor may also involve flood-zone or wetland setback rules on bigger projects. We check the parcel and handle whatever filing is required.

What siding works on a Centerport house facing the harbor?

North-facing walls on Little Neck and the shore road see salt and wind off Northport Bay. Fiber cement and insulated vinyl both handle it with no painting. Vinyl shake keeps the cottage look and resists the chalking that cheap vinyl shows near water. Cedar shake is right for the original summer cottages if you accept the upkeep. We use corrosion-resistant fasteners and heavier flashing on every harbor-side wall.

How long does siding take on a Centerport home?

A vinyl re-side on an average Centerport cape or split south of 25A runs three to five working days. The harbor cottages with additions and sheathing repairs, and the larger wooded homes near the Vanderbilt estate, take longer. Fiber cement adds time. Wind on the peninsula can stop work on exposed walls for a day. We set an honest schedule after the measure.

Can you do windows and siding together on my Centerport house?

Yes. On the old cottages the windows are often mismatched from decades of piecemeal replacement, and doing them all with the siding off lets us flash each one to the sheathing properly. Double-hung, casement, bay and bow, slider, awning, basement, and custom-shape units are all available in vinyl or fiberglass. On the harbor side we suggest glass rated for the exposure.

My Centerport cottage was a summer house. Is the wall even solid enough for new siding?

Usually it can be made solid. Many of the 1920s cottages have board sheathing with gaps or no sheathing at all behind the shingles. We open the wall, add plywood or OSB where it is missing, repair rot at the sills and corners, wrap it, and flash it. Then the new siding has something to hold onto. That prep is in your written estimate, not a surprise later.

Why Centerport Homeowners Choose AP

• In-house crews. AP's own installers handle the harbor cottages and the big wooded homes of Centerport. The crew that opens the wall is the crew that finishes it.
• Written price after we measure. On a cottage that has been added onto, a guess from the street is worthless. We measure every wall and look at the framing before writing the price.
• Based nearby in East Northport. Centerport is roughly 10 minutes from our shop by way of Route 25A or through Northport. It is one of our closest hamlets.