Siding Contractors in Lake Grove, NY
Lake Grove is a village with its own permits, and we know the drill. Free written estimate after we measure.
- Serving 11755
- Based in East Northport
- Licensed & insured
- Own crews, no subs
- (631) 972-0873
Siding for Lake Grove's Village Streets
Lake Grove incorporated as a village in 1968, right as most of its housing was going up. The result is a tight community of 1960s and 70s colonials, splits, and ranches on quarter-acre lots, with pockets of older homes near Middle Country Road and the First Congregational Church and some newer construction near the Smith Haven Mall end of the village. First-round vinyl and aluminum are common and worn out. AP Siding & Windows installs horizontal lap, insulated vinyl, vinyl shake, board and batten, and fiber cement, and we handle windows and roofing when a house needs the full exterior done.
Lake Grove is inland, flat, and a few blocks from Lake Ronkonkoma on its south edge. No salt exposure, but the village has plenty of mature trees, and the shaded north walls on many homes stay damp through spring and fall. The open streets near the mall and Route 347 get full sun and wind instead. We handle the shaded sides with breathable wrap and a drainage path behind the siding, and the sun-struck sides with heavier UV-stable panels. On the older homes near Middle Country Road we also expect to find sheathing that needs attention once the old layer comes off.
Siding services we provide in Lake Grove
Siding replacement
Full tear-off to sheathing, repair of what we find underneath, new water-resistive barrier, new siding and trim.
Siding repair
Storm damage, cracked or loose panels, and rot behind the siding.
Insulated vinyl siding
Foam-backed panel that adds R-value across the studs and keeps long runs flat.
Fiber cement siding
James Hardie and similar, where profile and trim detail have to look right.
Cedar and cedar-profile siding
Natural shake and clapboard for period homes, or the look without the upkeep.
Trim, soffit, fascia and gutters
So the whole exterior finishes at once rather than in two visits a year apart.
What we would put on a Lake Grove house
- Insulated vinyl Is what we recommend most often here, because it suits the post-war stock this town is full of. These houses were framed 2x4 with thin wall insulation, and the contoured foam backing adds R-value across the studs where the framing bleeds heat straight out. It also stiffens the panel, which keeps long runs flat.
- Fiber cement Is the choice for colonials and for any house where profile and trim detail have to look right. It holds a painted finish for years, will not soften in summer heat, and carries a Class A fire rating. It needs a flat, sound nailing surface, which is part of why we tear off.
- Standard vinyl Does a genuinely capable job on this stock and is the sensible choice on a defined budget. Modern fade-resistant panels in the right profile are a real improvement on 1990s material. On shaded lots we steer away from the palest colours, because that is where green cast shows worst.
Permits for siding work in Lake Grove
This is the one homeowners here get wrong, so it is worth being precise.
Lake Grove is an incorporated village. The Town of Brookhaven does not issue your building permit. The Village has its own building department, its own fee schedule and its own review calendar, and a Town of Brookhaven application will not be accepted for a Village address.
We work on both sides of that line regularly and we confirm which authority covers your address before anything gets filed.
How the job runs
- One We measure on site and open a section of the existing siding so you can see what is behind it. No phone estimates.
- Two You get an itemized written price with material, colour, trim scope and schedule on it.
- Three We confirm the permit authority for your address and file what is required.
- Four Our own installers do the work. Tear-off to sheathing, repairs, new water-resistive barrier, then siding and trim. Driveway stays usable and we magnet-sweep for nails before we leave each day.
- Five Walkthrough with you before we call it finished.
Lake Grove at a Glance
- ZIP
- 11755
- Township
- Town of Brookhaven
- Permits
- Village of Lake Grove Building Department
- County
- Suffolk County
- Estimates
- Free, in person, written price after measuring
- Crew
- In-house, based in East Northport
Lake Grove Neighborhoods We Serve
The village's oldest homes cluster near Middle Country Road, Hawkins Avenue, and the 1818 First Congregational Church, on lots that were once part of the New Village farming settlement. South of Middle Country Road toward Lake Ronkonkoma the streets off Hawkins and Pond Path are 60s splits and colonials. The neighborhoods near Moriches Road and the Smithtown line are similar with slightly larger lots. North of Route 347 by the Smith Haven Mall the village is mostly commercial with a few residential streets. East toward Centereach the housing is 70s ranches and high ranches on compact lots.
Lake Grove and the Surrounding Hamlets
We cover the entire Village of Lake Grove, from the mall down to the lake and from the Smithtown line east to Centereach. The same crew works Nesconset, Ronkonkoma, and Centereach on the same route, so being inside the village boundary never affects scheduling.
All siding townsFrequently asked questions
What does siding cost on a Lake Grove colonial or split?
It depends on the measured wall area, which is larger on a two-story colonial than on a ranch, and on the material, tear-off, and amount of trim and window wrap. Vinyl is the most affordable choice and fiber cement the costliest. Lake Grove homes are fairly consistent in size, but we still measure every house in person before we give you a written price.
Do I need a permit from the Village of Lake Grove for siding?
Lake Grove is an incorporated village, so permits do not go through Brookhaven Town. The Village of Lake Grove Building Department is the authority. The village has its own code and fee schedule, and it may want paperwork for work the Town would not. We check with the village before starting, tell you exactly what is required for your job, and handle the application ourselves.
What siding works on a shaded Lake Grove lot?
Lake Grove's mature trees mean a lot of damp north walls, and that is where cedar rots and cheap vinyl grows algae. Fiber cement and insulated vinyl both resist moisture well. More important than the panel is what is behind it: breathable house wrap and a drainage gap so water that gets in can get out. Keeping the bottom course off the mulch matters too.
How long will a Lake Grove siding job take?
A vinyl re-side on a typical Lake Grove split or colonial takes three to five working days once the village permit is in hand. Fiber cement takes longer because it is heavier and cut on site. Rain can add a day or two. Because this is a village, we build the permit lead time into the schedule, so your start date already accounts for it.
Can I replace windows while you re-side my Lake Grove house?
Yes, and most 1960s and 70s homes here are due. With the siding off we can pull the old units, flash new double-hung, casement, bay and bow, sliders, awning, or basement windows in vinyl or fiberglass directly into the sheathing, and run new siding tight to the frames. We file windows and siding together with the village so it is one permit and one inspection.
Does the village have rules about siding color or style in Lake Grove?
The Village of Lake Grove has its own zoning and building code, and while most residential siding choices are straightforward, the village can have requirements that differ from Brookhaven Town, especially on corner lots, properties near Middle Country Road, or homes close to the historic church. We confirm with the village building department before you order so there are no surprises at inspection.
Why Lake Grove Homeowners Choose AP
- In-house crews. AP's own installers handle every Lake Grove job. One crew and one foreman from the village permit through the final inspection, no subcontractors.
- Written price after we measure. We measure your house in person and give you a written number that includes the village permit fee, so there is nothing added later.
- Based nearby in East Northport. Lake Grove is about 25 minutes east of our shop on Route 347. Close enough for an easy measure and a quick return if you need us.