Siding Contractors in Springs, NY

A Siding Contractor Who Gets Springs

Springs is the year-round heart of East Hampton Town, and its houses are humbler than the estate section's. Along Springs-Fireplace Road, Three Mile Harbor Road, and the grid of lanes between them, the housing is 1950s through 1980s ranches, capes, and small contemporaries on wooded half-acre lots, with older Bonacker farmhouses and fishing cottages mixed in near Accabonac Harbor and Gerard Drive. Much of it is wearing tired vinyl, T1-11 plywood, or cedar that has never been maintained. AP Siding & Windows installs horizontal lap, insulated vinyl, vinyl shake, board and batten, cedar shake, and fiber cement on all of it, and replaces windows and roofing when they are due.

Springs has water on three sides but no ocean. Accabonac Harbor and Gardiners Bay to the east, Three Mile Harbor to the west, and Hog Creek to the north bring salt air, but the tree cover absorbs much of it. The bigger issue on most Springs lots is shade and damp: oak canopy, pine needles on the roof, and north walls that stay wet for weeks. We focus on house wrap, a ventilated gap behind the siding, keeping the bottom course well above grade, and corrosion-resistant fasteners. On the harbor-front and Gerard Drive houses, where the wind comes straight across the water, we tighten the nailing and move toward fiber cement.

Springs at a Glance

ZIP

11937

Township

Town of East Hampton

Permits

Town of East Hampton Building Department

County

Suffolk County

Estimates

Free, in person, written price after measuring

Crew

In-house, based in East Northport

Springs Neighborhoods We Serve

The Springs-Fireplace Road corridor and the lanes off it, around the Springs School and Ashawagh Hall, are the hamlet's center with modest year-round houses. Gerard Drive runs out along Accabonac Harbor with cottages on a narrow spit. The Clearwater Beach area and the streets off Three Mile Harbor Road face the harbor. Lion Head Beach and the Hog Creek lots sit on Gardiners Bay. The Pollock-Krasner House area near Accabonac Creek has older farmhouses on open land. Maidstone Park and the streets near Fireplace Road's end are compact beach bungalows. The wooded interior between the harbors is ranches and contemporaries under heavy oak.

Springs, Accabonac, and Three Mile Harbor

We cover all of Springs from the East Hampton Village line out to Gerard Drive, Lion Head, Clearwater Beach, and Maidstone Park. Springs shares the 11937 ZIP with East Hampton, and the same crew works both plus Amagansett, so jobs out here are grouped to keep the crew on site.

• East Hampton, NY
• Amagansett, NY
• Sag Harbor, NY
• Montauk, NY
• Wainscott, NY
• Bridgehampton, NY

Frequently asked questions

What does it cost to re-side a ranch or cape in Springs?

Springs houses are generally simpler than the village estates, which keeps the price reasonable, but we still have to measure. Wall area, material, tear-off, and trim set it. Removing T1-11 or failed vinyl and repairing sheathing underneath is the common add. Vinyl is the economical choice; fiber cement the premium one. We put a written figure in your hand after walking the house.

Do I need a Village permit for siding in Springs?

No, Springs is not part of East Hampton Village. It is an unincorporated hamlet, so the Town of East Hampton Building Department is the permit authority. A straight re-side in the same material usually does not require a permit, but sheathing replacement, changes to window openings, or work on a harbor-front house in a flood zone can. We confirm with the Town and file whatever is needed.

What siding works best on a shady Springs lot?

On the wooded interior lots, where moss and mildew are the enemy, insulated vinyl or fiber cement over house wrap with a ventilated gap performs well and is easy to wash. Cedar looks right on the Bonacker farmhouses but needs airflow and periodic treatment under heavy oak. On harbor-front walls at Gerard Drive, Lion Head, or Clearwater, we add stainless fasteners and favor fiber cement for the wind.

How long will a Springs siding job take?

Three to five working days for a vinyl re-side on a typical Springs ranch or cape. Fiber cement runs longer because each board is cut on site, and sheathing repair under old T1-11 can add a day. Harbor wind is a smaller factor here than on the ocean side. We schedule the job as a single block so the crew stays in Springs until it is finished.

Can you replace my windows and siding in one visit in Springs?

Yes, and many Springs houses need it. Mid-century windows with no flashing, or replacements that were set without any, let damp into the wall for years. With the siding off we install double-hung, casement, slider, bay and bow, awning, basement, or custom-shape units in vinyl or fiberglass, flash them properly, and side back to the frame. The house is tighter and warmer when we leave.

My Springs house has T1-11 plywood siding. What is involved in replacing it?

T1-11 is common in Springs on 1970s and 80s contemporaries. It was often used as both sheathing and siding, so when it rots there is nothing behind it. We open a section during the estimate to see what is there. If it is structural, we sheath over it or replace it, add house wrap, and then install the new siding. We price that honestly rather than discovering it mid-job.

Why Springs Homeowners Choose AP

• In-house crews. AP's own installers handle Springs jobs from tear-off to cleanup. We do not send a subcontractor out to Fireplace Road and hope for the best.
• Written price after we measure. We measure the house, check what is behind the old siding where we can, and write a price that reflects the real scope.
• Based nearby in East Northport. Springs is close to two hours from our shop, so we group it with other East Hampton work and keep the crew on site every workable day until your job is complete.